fan-shaped nozzle
Standard integral nozzle (VP, VVP)
▶ Features
· Strong in the center and gradually weakens across both ends
Fan-shaped injection of flow distribution
· Excellent wear resistance
▶ Uses
· Surface treatment, cleaning, cooling, coating, water film
▶ Specifications
· Angle of impact: 15°~115°
· Material: B, Stainless Steel, Various Resins
(*Ceramic tip type available)
Standard integrated nozzle (UVVP)
▶ Features
· Strong in the center and gradually weakens across both ends
Fan-shaped injection of flow distribution
· Excellent wear resistance
· Ultra-high molecular weight polyethylene material
▶ Uses
· Cleaning, cooling water, coating, polishing
▶ Specifications
· Spray angle: 65°
· Material: UPE
Standard detachable nozzle (V, VV)
▶ Features
· Strong in the center and gradually weakens across both ends
Fan-shaped injection of flow distribution
· When arranging multiple nozzles, overlap both ends of the pattern
When used, the flow rate can be evenly sprayed across the entire width.
· V consists of three parts: a spray tip, a cap, and an adapter, and
Only the damaged or worn spray tip can be replaced separately.
▶ Uses
· Cleaning, cooling, application, water film
▶ Specifications
· Angle of impact: 15°~115°
· Material: B, Stainless Steel, Various Resins
(*Ceramic tip type available)
Standard coin nozzle (CVVP)
▶ Features
· Strong in the center and gradually weakens across both ends
As a coin-type debt-type spin-off of the flow distribution
By designing the nozzle to be very thin, in the shower pipe
It does not protrude from the outer surface of the pipe even when installed,
Easy nozzle arrangement in confined spaces
▶ Uses
· Cleaning, cooling, application
▶ Specifications
· Angle of Discharge: 65°, 80°, 90°
· Material: Stainless steel
One-touch detachable nozzle (INVV)
▶ Features
· Strong in the center and gradually weakens across both ends
Fan-shaped injection of flow distribution
· Easy replacement with one-touch attachment/detachment
· Excellent chemical and heat resistance
· Identifiable by color based on spray amount
(*Suzy Jae ONLY)
▶ Uses
· Parts that are difficult to clean, coat, repair, and install
▶ Specifications
· Spray angle: 50°~115°
· Material: PP, PPS, Stainless Steel
Standard uniform nozzle (VE, VEP)
▶ Features
· Uniform flow rate across the entire spray pattern
Fan-shaped distribution
· Uniform impact force per unit area
· VE allows for the replacement of damaged or worn spray tips.
▶ Uses
· Cleaning, coating, cooling, water film
▶ Specifications
· Angle of impact: 15°~115°
· Material: B, Stainless Steel, PVDF
(*Ceramic tip type available)
High Pressure Equalization Nozzle (VNP)
▶ Features
· Uniform flow rate distribution across the entire spray pattern
Debt-type injection
· 1/8 scale designed for high-pressure cleaning
▶ Uses
· High-pressure cleaning
▶ Specifications
· Spray angle: 15°~ 65°
· Material: B, Stainless Steel
(*Ceramic tip type available)
Ultra-high pressure uniform nozzle (DSP)
▶ Features
· Globally unique to IKEUCHI
Rare powerful cleaning nozzle
· Thin and strong like a sharp razor blade
Characterized by an even fan-shaped pattern of impact force
· Ultra-high pressure specifications for high-pressure cleaning
▶ Uses
· High-pressure cleaning (descaling, degreasing, rust removal)
▶ Specifications
· Angle of discharge: 12°~ 15°
· Material: Stainless steel
(*Ceramic tip type available)
Standard wide-angle nozzle (YYP)
▶ Features
· Strong core due to low liquid pressure and
A flow rate that gradually weakens across both ends
Wide-angle fan-shaped spray of distribution
· Spray at a 75° elevation angle relative to the nozzle axis
· Low pressure specifications, does not clog easily
▶ Uses
· Cleaning, foam removal, cooling, water film
▶ Specifications
· Spray angle: 100°~ 140°
· Material: B, Stainless Steel, Various Resins
(*Ceramic tip type available)
Ultra-low pressure wide-angle uniform nozzle (LYYP)
▶ Features
· Uniform flow rate distribution at ultra-low pressure (0.015 MPa)
Ultra-wide angle fan-shaped spray
· Appropriate impact force that does not produce spray foam
Small dispensing type
· Does not clog easily, and all products are gold-coated
▶ Uses
· Application
▶ Specifications
· Angle of discharge: 70°~ 120°
· Material: PVC resin, PCTFE resin, stainless steel
Eccentric Uniform Nozzle (OVVEP)
▶ Features
· Located eccentrically from the nozzle axis, but
Fan-shaped spray across the entire spray pattern
Uniform flow rate distribution
· Elimination of spray liquid clumping when multiple nozzles are arranged
· No need to install a separate nozzle on an inclined surface
▶ Uses
· Cooling, application, cleaning
▶ Specifications
· Angle of impact: 45°, 60°
· Material: B, Stainless Steel
Self-cleaning standard nozzle (MOMOJet)
▶ Features
· Strong in the center and gradually weakens across both ends
Fan-shaped injection of flow distribution
· If foreign matter is mixed in the spray part, set the spray pressure to 0.03 MPa.
When lowered, the spray nozzle opens wide to discharge foreign matter, and
If you raise the spray pressure again, it sprays normally.
· Align the nozzle body axis with the spray axis
Designed for easy multiple arrays
▶ Uses
· Cooling, foam removal, cleaning, use of circulating water
▶ Specifications
· Angle of discharge: 80°
· Material: Stainless steel
ON/OFF controlled nozzle (SO-V)
▶ Features
· Strong in the center and gradually weakens across both ends
Fan-shaped injection of flow distribution
· Reactivity due to control air ON/OFF
Excellent injection control possible
· No water flows when ON/OFF
▶ Uses
· Coating, moisture control
▶ Specifications
· Angle of impact: 15°~115°
· Material: Stainless steel
Direct pipe connection nozzle (QB)
▶ Features
· Strong in the center and gradually weakens across both ends
Fan-shaped injection of flow distribution
· Easy direct connection of the adapter to the piping,
Install by drilling a (Φ14.3mm) hole
· Can be attached to and detached from the adapter with a single touch
· There are multiple lineups, and they can be distinguished by color.
· The nozzle spray direction can be adjusted up to 50°
▶ Uses
· Pre- and post-painting treatment, cleaning
▶ Specifications
· Angle of Discharge: 40°, 65°, 80°
· Material: Main parts FRPP, parts stainless steel
Air-intake uniform nozzle (EJVV)
▶ Features
· Compared to a standard fan-shaped nozzle, in the direction of spray thickness
Large spray width, and width and thickness of the spray pattern
The ratio is 3 to 4:1
· Foreign matter passage diameter, average particle size in standard fan-shaped nozzle
Slightly larger in comparison
· When using a multiple nozzle array, overlap both ends of the pattern
When in use, the flow distribution becomes uniform across the entire width.
▶ Uses
· Cooling, cleaning
▶ Specifications
· Angle of impact: 80°, 90°
· Material: B, Stainless Steel